SKU
A-5093
$0.24
Rating:
98 % of 100

Quick Overview

Get It Fast - Same Day Shipping

Additional Information

More Information
SKU A-5093
Manufacturer Tayda Electronics
MPN Heatsink TO-220 4 Fins Aluminium
Customer Reviews

10 Item(s)

Show per page
  1. Quality product
    Price
    100%
    Quality
    100%
    Value
    100%
    The item has no manufacturer or part number marked on it but it is a quality product.

    It is basically an aluminum extrusion with saw cut ends and tapped hole.

    The saw cuts are 'raw' but not unreasonably sharp and do not have a burr.

    The rear heat transfer surface is reasonable flat but can be enhanced by lapping. To do this rub it across a piece of fine sandpaper on a flat surface until the entire surface shines.

    The hole is tapped for an M3x.5 screw. I used the a mounting screw from an old computer CDROM and it worked great.

    There was a slight burr on the edge of the hole down between the fins. I used a razor knife to remove it to avoid the off chance of it flaking off later and causing a short.

    The heatsink is 26mm long x 17mm wide x17mm tall (fin side). The base is 2.5MM thick, the fins are 1.5MM thick. The hole is on center line between the fins and 7.5MM from the top. The unit weighs 10g (0.4oz) (without a screw).

    With the screw in it is just the right height to allow the legs to push through into your PCB or breadboard. If you use it with your breadboard be sure to leave an air gap underneath to avoid transferring the heat to the plastic.

    I am using it to cool a 7805 Vreg and it works great.

    Overall I would buy it again and would recommend it to a friend.

    Review by

    Posted on

  2. good value
    Price
    100%
    Quality
    100%
    Value
    100%
    adorable little heatsinks at a pretty fair price

    Review by

    Posted on

  3. Can use #4-40 machine screws
    Price
    80%
    Quality
    80%
    Value
    80%
    Work great with TO220 packages

    Review by

    Posted on

  4. Recommended Product -> Specs
    Price
    100%
    Quality
    100%
    Value
    100%
    These are great quality and the price is right.

    Specs:

    Weight: 10.35 g

    Length x Width x Fin Height: 26 x 17 x 17 mm

    Mounting Hole Location: 7.5 mm from end
    Mounting Hole: M3 Thread, standard pitch
    Recommended Mounting Screw: M3x5

    Thermal Resistance Natural Convection: 17.5°C/W
    Thermal Resistance Forced Air Flow: 4°C/W

    Review by

    Posted on

  5. Great, but how many C/W?
    Price
    100%
    Quality
    100%
    Value
    100%
    Have used these very nicely on LM350s, but would love to know their thermal resistance rating.

    Review by

    Posted on

  6. Awesome
    Price
    100%
    Quality
    100%
    Value
    100%
    Great price for even better product

    Review by

    Posted on

  7. Can't beat them
    Price
    100%
    Quality
    100%
    Value
    100%
    For the value, you can't afford not to have these in your parts box. The mouning hole is even threaded, which I have to admit was a pleasant surprise.

    Review by

    Posted on

  8. Excellent
    Price
    100%
    Quality
    100%
    Value
    100%
    Low price, good quality

    Review by

    Posted on

  9. Great Value!
    Price
    100%
    Quality
    100%
    Value
    100%
    At less than a quarter of the price of other suppliers, these heat sinks are fantastic value for money.

    Buy 10x of these, they always come in handy for those higher current applications!

    Review by

    Posted on

  10. Excellent quality
    Price
    100%
    Quality
    100%
    Value
    100%
    These are some nice heavy heatsinks.
    The price is reasonable.

    Review by

    Posted on

10 Item(s)

Show per page
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account