Dual-axis XY PS2 Joystick Module

PS2 gamepad is equipped with the original high-quality metal key rocker potentiometer. The module has two analog output interfaces and one digital output interface. The output values correspond to (X,Y) bi-axis offset respectively, and the type is analog. Key indicates whether the user presses it on the Z-axis, and its type is digital switching quantity.Module integrated power indicator, can display the working status, Coordinate identifiers are clear, concise and accurate,With it can easily control objects (Such as two degrees of freedom steering gear head) in two-dimensional space movement, so you can through controller programming, sensor expansion board plug, complete creative remote control interactive works

Specifications
1.Input Voltage: 3.3V to 5VDC
2.Output Signal: the module has two analog output lines and one digital output line. The output values correspond to (X,Y) biaxial offset respectively,and the type is analog,Key indicates whether the user presses it on the Z-axis, and its type is digital switching quantity.
3.Arduino controller can be programmed, the sensor expansion board plug, complete with creative remote interactive works.
4.Cross joystick is a bi-directional 10K resistor, with the rocker in different directions, the tap resistance with the change. This module uses 5V power supply, the original state of X, Y read voltage of 2.5V or so, when pressed with the arrow direction, the read voltage value increases with the maximum to 5V; arrows in the opposite direction to press, read the voltage decreases , The minimum is 0V.

How to connect with Arduino: Click Here
Size(WxL): 27x34mm
This product was updated image on 01-04-2024